You have a problem with TA3D, it doesn't run or it crashes...
/
Vous avez un problème avec TA3D, il ne se lance pas ou plante...
-
XChesser
- Posts: 10
- Joined: Tue Aug 24, 2010 10:49 pm
Post
by XChesser » Thu Oct 14, 2010 11:55 am
I made a try to run new 2695 build but cmake fails:
Code: Select all
-- Looking for the Yuni Framework - failed ('yuni-config' not found)
CMake Error at CMakeLists.txt:66 (Message):
The Yuni Framework could not be found.
Full output is attached.
Seems like I won't be able to play it in Sabayon
-
Attachments
-
- Log.bz2
- (928 Bytes) Downloaded 1144 times
-
zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
-
Contact:
Post
by zuzuf » Sun Oct 17, 2010 12:12 pm
ok, go to src/libs/yuni
and update your copy of Yuni to r1236:
This is not a definitive fix but it should let you built the game.
=>;-D Penguin Powered
-
milipili
- Posts: 545
- Joined: Thu Nov 02, 2006 8:52 am
- Location: Paris (France)
-
Contact:
Post
by milipili » Sun Oct 17, 2010 12:33 pm
There are a lot of code refactoring about the yuni-config / CMakeList in order to make the command 'make install' works and to provide a stable release. Sorry for inconvenience.
Damien Gerard
Ta3d & Yuni Developer
-
zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
-
Contact:
Post
by zuzuf » Sun Oct 17, 2010 12:54 pm
Last revision should build normally
=>;-D Penguin Powered
-
XChesser
- Posts: 10
- Joined: Tue Aug 24, 2010 10:49 pm
Post
by XChesser » Mon Oct 18, 2010 1:45 pm
Thanks, now I can build the game. But it still crashes on units loading. Will wait for fixes
-
zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
-
Contact:
Post
by zuzuf » Mon Oct 18, 2010 3:46 pm
Does it show up TA3D's crash report window ? If yes can you send the report please ?
=>;-D Penguin Powered
-
XChesser
- Posts: 10
- Joined: Tue Aug 24, 2010 10:49 pm
Post
by XChesser » Mon Oct 18, 2010 5:41 pm
No, not any window. I start skirmish, first loading goes well but on units loading stage it rapidly increases memory usage and crashes.
I've attached the log.
-
Attachments
-
- ta3d.log.bz2
- (8.45 KiB) Downloaded 1109 times
-
zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
-
Contact:
Post
by zuzuf » Mon Oct 18, 2010 8:16 pm
I'll run a few tests on my netbook, it may be due to Intel chips sharing system memory.
=>;-D Penguin Powered
-
XChesser
- Posts: 10
- Joined: Tue Aug 24, 2010 10:49 pm
Post
by XChesser » Mon Oct 18, 2010 11:14 pm
I used to run ta3d about 2-3 years ago on this laptop. It was 0.5.x or 0.4.x version of ta3d. And I ran OpenSUSE 10.3 at that time.
So I think it is not hardware that causes this problem.
-
zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
-
Contact:
Post
by zuzuf » Tue Oct 19, 2010 3:41 pm
The 0.6 branch is different from previous versions for many things because it uses SDL instead of Allegro/AllegroGL and all the low-level interfaces have been rewritten so it could be an hardware dependent bug.
=>;-D Penguin Powered
Who is online
Users browsing this forum: No registered users and 7 guests